FAQs

In many of today's television and theatrical programming, it is not difficult to see the lighting division with different lighting effects, add a lively atmosphere for the show, and many of them bright light effect, it is through the filmprojected images caused by light. However, the pattern piece only to make a fixed light effect through color and pattern, but for some special design effects such as raging waves, bridges, fierce flame, the sky clouds, will not be able to play for the gaffer, it limits their creativity. Therefore, it is not difficult to believe that the market still has room for development, and thus evolved to the emergence of dynamic pattern film. Nevertheless, only the dynamic pattern piece is not the perfect representative to make a unique pattern, it must be with the pattern piece to the stage, to create the most beautiful light (of course not less the role of the color wheel).

1, consider the design of the film: some can not consider the mesh of the cloud pattern, can also be based on the desired density and type of cloud and select the pattern. The choice of pattern is the most basic and the most important one, because many interesting effects, in fact, are made by changing the focal length.

2, focus adjustment pattern pieces to clear focus, in fact does not achieve the desired lighting effects, and moving decrease, effect is not ideal; on the contrary, the dynamic pattern pieces adjusted to a clear focus, you can move to larger, but the pattern will disappear, and precise projection the quality and direction of movement, the focus will be affected, so, in order to achieve the ideal lighting effects, carefully research focus in fact is very important, it should pay special attention to.

3, the direction of movement, dynamic pattern piece of flexible assembly system, through the DMX512 control signal, adjust it to any angle, for example, can use the horizontal movement, to produce the effect of clouds floating in the air; or the use of vertical movement, make up the fire, even the heavy rain. In addition, some are not vertical or horizontal patterns of dynamic effects, you can try to horizontal or vertical channels reversed, and even the dynamic pattern piece to rotate in the opposite direction to make effect. Furthermore, it is possible to control the rotation mode of the dynamic wheel by DMX control, not just to make a continuous rotation, which is especially useful for the font or trademark projection.

4, speed, although the speed of the dynamic pattern of the film will affect the effect of projection, but in fact, we should pay attention to the design of the pattern and dynamic design of the film itself, too close or too sparse on the effect will be affected.

5, color, choose to have CMY mixed color system lamps, dynamic pattern wheel can be projected out of the effect of smooth color change, change the choice will be more. In addition, when the beam refraction, the system will also make color gradient, so that the effect of dynamic graphics more three-dimensional (especially the use of a number of two color color filter).

To remove and install, fuse or other parts, or do not use computer lights, to cut off the exchange and overload and ground protection.

Computer lights can not be exposed to rain or tidal wetlands.

UV (UV) radiation and bulb explosion

Computer lights must not be used when the lens and cover are missing or damaged.

When replacing the bulb, open the outer cover or remove the bulb, and let the computer light cool for at least 15 minutes. Wear gloves and safety glasses to protect your hands and eyes.

No direct light bulbs.

If damaged, worn or in bulb than life before replacement.

Fire prevention

Do not short circuit temperature control switch and fuse, fuse must be replaced with the same model.

At least 1 meters away from combustible material (such as fabric, wood, paper).

Computer lights from the lighting surface shall not be less than 1 meters.

At least 0.1 meters of space around the cooling and ventilation system.

There must be no shelter in front of the camera.

The surface of the computer will be very hot, and it should be cool for at least 5 minutes before it is processed.

Never modify the computer lights or install non night sun accessories.

The ambient temperature is not more than 40 degrees Celsius can not turn on the computer lights.

Falling injury prevention

You can't carry a computer light alone.

Hanging installation, to ensure that the lamp frame can withstand 10 times the weight of all computer light.

Make sure all the outer cover and mounting parts are stable, and use the safety rope.

When installing or removing the computer light, the work area is to prevent outsiders from entering.

Colour

Head light has a very wide range of colors can meet most lighting design requirements, carefully choose a suitable color plate into a combination of high quality filter change is possible. All of the interchangeable filter. 5 concentric colors to reconcile, prevent ultraviolet radiation. Fixed or in the middle position color change, high speed color change 006 seconds / time, there is no closed light color can change. Coupled with the CMY color mixing system, can create endless color.

Color temperature correction

Disc gradient color correction filter and the entire visible range of colors together, adjusted from 3200K-5600 K, reduce the color correction to make operators, get a little higher light or cool improved.

Dimming

Dimmer makes the propagation of the light softer, creating a combination of washing and color combinations. The dimmer can obtain the diffusion beam of different grade, software and hardware is more intense, more diffuse light.

Light control device

Unique and innovative light control system and switch control system can be freely combined control. At the same time, according to the needs of the operation, the light source can be reduced to achieve the visual function of other devices. It has low noise (less than 30 dB) to meet the needs of different places. Switch instantaneous speed up to 0.01 seconds.

Strobe

Mute, fast adjustable strobe can be adjusted in the range of 0.5-12 per second. In full speed strobe can be in a variety of artificial control, with the different approaches but equally satisfactory results. There are 2 pieces of strobe closing system can completely block beam without leakage.

Filter

Cone filter, light filter or thread mirror

Daily maintenance of head lamp

Note: too much dust, smoke, and fine particles can damage the appearance of equipment, and even cause overheating damage equipment

Disconnect the power supply before disconnecting the housing.

Regular cleaning equipment shell, specific according to the working environment.

Cleaning

Be careful when cleaning optical components to keep them clean and clean. The surface of optical element is easy to scratch and break.

Do not use the solution to wipe, otherwise easy to cause plastic and coating layer damage.

Regularly check the gas strainer, such as the blockage to clean up.

Regular cleaning fan and air vents to ensure the cooling effect of the bulb.

Wiping optical element

1 disconnect the power components completely cooled, remove the lamp.

2 air gun blows away the dust particles surface parts.

3 with the glass liquid or distilled water soft cloth or cotton swab wipe colorless to surface fouling. Don't scratch the surface. To graze a few times.

4 with colourless paper cotton or cotton swab with industrial alcohol to remove surface soot. Also can be used for glass cleaning liquid, but must use distilled water to remove fouling. With a clean soft cloth gently wipe from the center to the edge. Or with an air gun to blow.

Wipe and vent fan

With a soft brush, cotton, air gun to remove surface dirt.

Clean or replace air cleaner

1 disconnect the power supply, use a screwdriver to loosen the two screws on each side, remove the protective cover, removing the wind leaf.

2 use the vacuum cleaner to clean the surface or air gun. They can also be replaced. If it is contaminated by smoke stains and other stains, can be soaked in soapy water.

3 replace the blade or cover.

Outdoor lighting is different from indoor lighting, outdoor lighting during the day is mainly daylight and sky lighting. Night outdoor lighting design includes the following things - the electro-optical lighting can not illuminate the sky as day; therefore, the background is always dark night, lighting objects and the background of the greater contrast between. There is no light source that is stronger than the sun, so if you want to illuminate the area, you must have a large number of smaller light sources. Eyes are different in low level lighting and high light conditions.

People's emotions are different at night. Lighting can affect people's emotions, not only when they are watching the scenery, sports and outdoor entertainment. Outdoor lighting can be seen from a distance, and the night is not good lighting is distracting and annoying. Night sports or driving lighting to have special lighting in order to ensure personal safety.

We know that the landscape art lamp is an indispensable part of the modern landscape lamp. It not only has a high ornamental, but also emphasizes the harmony and unity of the landscape and scenic spots of the art and history, culture, the surrounding environment.

While many domestic residential outdoor lights use (as tree lights, floor lamp and so on) are high pressure lamp 220V, in case of leakage or damage, it is easy to hurt people, and is abroad in this regard has been thoughtful, landscape lamp mostly through the transformer step-down, make its control within the human body safety voltage in order to ensure the safety.

In addition, some outdoor garden lights appropriate use of glass products, some people think that one of the factors of instability in the outdoor lamp glass is also safe, but experts believe that good quality glass (especially special glass) even harm effect on human broken is very small, if the developer can focus on the use of building materials, willing to cost using good materials, it can greatly improve the safety factor.